Specac’s Electrical Heating Jacket is designed to allow the study of solid and liquid samples over a temperature range from ambient to circa 250°C, via transmission spectroscopy ranging from the Far UV through to the Far IR. The variation in temperature is achieved by heating the Electrical Heating Jacket from its dedicated 30-volt supply 4000 Series power controller whilst a particular liquid or solid cell holder is contained within the Electrical Heating Jacket. Principally, the Electrical Heating Jacket is used with Specac’s Advanced Liquid or Solid Transmission cells or a Solid Cell Holder. The Jacket is installed into the sample compartment of an FTIR Spectrometer via the 3” x 2” slide mounting plate.
Capable of operating up to as high as 250°C.
Liquid or solid sampling cells can be quickly and easily swapped in and out of the cell to suit the specific nature of the application.
Operate in static or flow modes of operation.
Extremely versatile sampling capability.
Specac’s Electrical Heating Jacket is designed to allow the study of solid and liquid samples over a temperature range from ambient to circa 250°C, via transmission spectroscopy ranging from the Far UV through to the Far IR. The variation in temperature is achieved by heating the Electrical Heating Jacket from its dedicated 30-volt supply 4000 Series power controller whilst a particular liquid or solid cell holder is contained within the Electrical Heating Jacket. Principally, the Electrical Heating Jacket is used with Specac’s Advanced Liquid or Solid Transmission cells or a Solid Cell Holder. The Jacket is installed into the sample compartment of an FTIR Spectrometer via the 3” x 2” slide mounting plate.
Capable of operating up to as high as 250°C.
Liquid or solid sampling cells can be quickly and easily swapped in and out of the cell to suit the specific nature of the application.
Operate in static or flow modes of operation.
Extremely versatile sampling capability.
